Fender Mustang Amps and Fuse Wikia
Register
Advertisement

The Unofficial Fender Mustang Amps and Fender Fuse Software Wiki[]

Fender's Mustang modeling amp series and Fender Fuse software offers a vast array of features and controls that can be mixed-and-matched to allow users to shape their tone, from subtle changes to wild extremes:

The company's decision to not offer a comprehensive guide has left many users scrounging the Web for answers. This is the place to find out more about the features of the amp and software. Consider this wiki to be "The Unofficial Guide to Fender Mustang Amps and Fender Fuse Software".

This guide couldn't have been done without the contributions of early owners that shared information on the Web. Please read Special Credit and Thanks. Corrections, additions, suggestions and clarifications are sought and welcome.

Table of Contents / Articles[]

Latest activity[]


Mustang Amps

Band Tracks[]

On the Presets view (amplifier and effects), there's a BAND button that displays installed backing tracks. Of course, if you've never imported any, you won't see them. So first, import some backing tracks. Where do you get them?

  1. Click the Community button and navigat to Home (if you're not there alread) by clicking the house icon.
  2. Click the Download Band Tracks button. A list of tracks displays.
  3. Search and find one you want, and click the green DOWNLOAD button. The track details displays.
  4. Click the DOWNLOAD button again, and save the WAV file to your PC.
  1. Wait - you're not done.
  2. Click the MEDA LIBRARY button.
  3. Click the ADD TO LIBRARY button.
  4. Navigate to where you saved the WAV file(s), select them, and click Open. The file(s) are imported to the Band Track area.
  5. Click Main Menu >  View > Preset Editor to return to the Presets view.
  6. Click the BAND button, and select MP3/Wave. The dropdown displays your imported backing track WAV files. Select one, and click OK.
  7. Now you might have a backing track that plays on your computer - and not through your amp, as you would expect.

I say might, because it's likely that your file didn't download or downloaded a 6KB useless file, because Fender doesn't maintain their software.


=====Mustang GT/GTX - Random Audio Dropout fix https://www.vguitarforums.com/smf/index.php?topic=28568.msg208028;topicseen#msg208028  ===== I do agree Fender needs to do a failure analysis on the faulty units that exhibit random Audio Drop outs, and perhaps implement an ECO(Engineering change order) to use a higher specification Ribbon cable and Male header

Or test for faulty flux removal of the SWITCHING HEADPHONE JACK.

The Mustang GT/GTX follows similar signal flow of the Mustang III-V (V2)

If the Headphone Jack is occupied, or if there are broken solder joints on the headphone jack, no sound emerges from the internal 12" Speaker
[img width=777 height=600
https://i.postimg.cc/tRFQNgrh/Musant-V2-Signal-Flow.png[/img]]


An unoccupied Headphone Jack with[b WORKING CONTACTS [/b]is essential for the Mustang amp's Speaker  to continue working and not cut out]

[imghttps://i.postimg.cc/Nj5dbJgW/Mustang-headphone.png[/img]
The Headphone Jack is unsecured low cost vertical PCB Mounted 3.5mm TRS Switching jack, and any side to side tugging on the headphone jack cable WILL compromise the internal PCB solder connections on the switching contacts, and create random Audio drop outs.]

[imghttps://i.postimg.cc/pLspVCzX/Mustang-headphone3.png[/img]   ]

Above right (Blue Circle)  Inspect the Headphone Jack PCB Mounting pads for any breaks, cold solder joints, etc  - these solder pads can easily weaken if a headphone cable plug was tugged too hard.

[imghttps://i.postimg.cc/kXhcVQxw/Mustang-headphone-ribbon-cable.png[/img]]

The Headphone Jack analog circuitry is among an array of signals for sensing the front panel controls on the common Front Panel Ribbon Cable (Blue Circle above) connected to the CODEC Board

Its a 16 pin (0.100") IDC Ribbon cable
[img
https://i.postimg.cc/0QBgX6Tf/20200505-161012.jpg[/img]]

I observed the production line applies a small dab of clear RTV glue on this 16 pin IDC plug to keep it connected to the 2x8 (.100") PCB Male Header on the CODEC board , but often this plug along with the contact former dielectric base on the Male Header can still vibrate free

If ANY electrical contact in any of the Blue circles above are weak or compromised  - this results in random  audio drop outs

Luckily None of my Mustang GT / GTX amps have exhibited this random Audio drop out problem, but Ive posted the likely areas where to look in the circuitry to implement corrective action. 

« on: Today at 01:47:37 PM »

Advertisement